add share buttonsSoftshare button powered by web designing, website development company in India

How To Protect Trees During Construction Work

Your property's trees add value. Shade trees can be used for both commercial and residential purposes. It is important to preserve trees when construction works are occurring nearby as under the low impact development criteria.

Because of their aesthetic and environmental value, homes are often built near trees. Hence,here are some things to have a look:

Image source google

Construction work is what causes the most tree damage. Arboricultural consultants should be consulted with all parties involved in the project to avoid long-term and short-term tree damage.

Protect existing trees – Heavy machinery and construction work near trees can cause irreparable harm. Arborists believe that fixing tree damage is more costly than preventing it. To protect trees, you should install visible and long-lasting barricades.

For young trees between 1 and 4 years old, the protection area should be minimal at 30 cm for every 2.5 cm of trunk size. The protected area should be two meters wide from the crown of mature trees.

Protecting root systems – Trees have two types of roots. Large and small absorbing roots. The large system is horizontally expanding and measures between 15-60 cm deep.

They provide anchorage and nutrients transport. They are 0.16 cm wide and absorb nutrients and water. A tree's health can be affected if one of these systems is damaged.

Before and after any construction works are done on your property, it is wise to have a tree survey. This is the best way for you to determine if your trees are healthy and what steps should be taken to prevent them from becoming damaged.

Stormwater Management For Industrial And Construction Sites

Before any work can begin, all construction sites, industrial plants, municipalities, and other entities must have a stormwater management program in place.

According to the EPA's National Pollutant Discharge Elimination Systems (NPDES), these entities must implement a stormwater management plan that complies with local low impact development solutions.

Image source google

Stormwater is defined by the NPDES as precipitation that flows on land but is not absorbed into the ground. The water moves over land and picks up pollutants, chemicals, and sediment that can cause water quality problems.

To prevent stormwater pollutants from entering nearby water bodies, the NPDES Stormwater Program regulates stormwater discharges from MS4s, construction sites, and industrial sites.

The NPDES Stormwater Program does not constitute a national standard. States administer their programs based on these standards. However, the EPA may be the main authority on stormwater management in certain states and territories.

Stormwater regulations differ for industrial and construction sites. For example, construction sites that cover one or more acres must be licensed by the Construction General Permit.

For industrial sites, stormwater management regulations will be more strict. Material handling and storage sites must comply with these regulations.

According to General Pretreatment Regulations 40 CFR405 to 471, these facilities include heavy manufacturing and coal and mineral mining, hazardous wastewater treatment, and storage, landfills and steam electric power plants, sewage treatments, light manufacturing, and transportation.

All such facilities must follow the EPA's Multi-Sector General Permit (MSGP). This includes submitting a Notice Of Intent, installing stormwater management procedures, as well as developing a Stormwater Pollution Prevention Plan (SWPPP), according to the 2008 MSGP requirements.